통합검색 검색 닫기

학부소개

교수진소개

김병수 프로필 사진
  • 성명

    김병수 교수

  • 전공

    자동차설계 및 생산, 피로파괴역학, 구조물 안전 설계

  • 최종학위

    University of Alabama 공학박사

  • 연구실

    일강원(G동) 408호

  • 연락처

    055-320-3749

  • 이메일

    mechkb@inje.ac.kr

학력

  • 부산대학교 기계설계공학과 학사
  • University of Alabama, 기계공학 (M.S.)
  • University of Alabama, 기계공학 (Ph.D.)
  • 인제대학교 기계 자동차 공학부 교수 (2000. 9~현)
  • 부산대학교 항공우주공학과 연구원 (2000. 1~2000. 8)
  • 미국 University of Alabama at Birmingham 의용공학과 Research Fellow   (1998 ~1999)
  • University of Alabama Mechanical Dept R.A. & T.A. (1992~1998)
  • 경전산업 (주) 기술개발부 (1990~1991)
  • 한국훼스토(주) (1988~1990)


교육 및 연구경력

- 부산대학교 항공우주공학과 선임연구원

- 텍사스대학교 교환교수

기타 및 학술관련 경력

- 한국자동차공학회 정회원

- 대한기계학회 정회원

- 한국정밀학회 정회원

연구 관심 분야

  • CAE, Solid mechanics and mechanical design, structurd analysis of vehicle
  • 이종재료의 균열에 의한 파괴해석
  • Sress analysis by finite elements and experiments 
  • 접촉하중에 의한 구조물의 파괴거동 해석
  • Fracture mechanics, Bimaterials failure, composite mechanics
  • Tribo-coating contact mechanics, Friction and Wear 
  • 티타늄 합금의 파괴거동해석
  • 브레이크 시스템 구조해석
  • Biomechanics of artificial joint, Total hip joint, Rotor Dynamics

강의 분야

1. 학부개설교과목

  • Capstone Design Ⅰ,Ⅱ
  • 기구학
  • 정역학


저서 및 주요 논문

1. Kim, B.S. and Moon, B.Y. and Mann, K.A. and Kim, H.S. and Boo, K.S. "simulated crack propagation in cemented total hip replacements," Journal of Materials Science & Engineering-A,Vol.483, PP.306~308, 2008.

2. Kim, B.S. and Song, J.H. and Kim, H.S. "Vehicle longitudinaland Lateral Stability Enhancement Using A tcs and Yaw motion controller," International Journal of Automotive Technology,  2007.

3. Kim, B.S. and Moon, B.Y. and Park, J.H. and Mann, K.A. " Biomechanical Analysis of Cemented Total Hip Replacements Using FEM," Journal of Mechanical Science and Technology(1738-494X), 2006

4. Kim, B.S. and Moon, B.Y. and Park, J.H. "Biomechanical Finite Element Analysis of bone Cemented Hip Crack Initiation According to Stem Design," KSME international journal,  2006.

5. Kim. B.S, "A comparison of statistical model to change of skin temperature," Journal of The Korean Data Analysis Society,  2006.

6. Kim, B.S. and Moon, B.Y. and Kang, H.K. and Chung, S.W. " Study for Evaluation of Surface Cracks on Tribological Coatings Failure in Contacting Systems,"Journal of Key Engineering Materials, 2006.

7.Kim, B.S. and Moon, B.Y. “Crack Face Friction Effects on Mode ∥ Stress Intensities for a Surface-Cracked Coating In Two-Dimensional Rolling Contact,” Journal of The Korean Society for Precision Engineering, 2005.

8. Kim, B.S. and Moon, B.Y. and Kim, K.H. "A study on Contact Deformation of Automotive Door Weatherstrip Using Non-Linear Finite Element Method,"Journal of The Korean Society of Automotive Engineers,  2005.

9. Kim, B.S. and Kim, H.S. and Choi, Y.and Hwang, H.J. and Kang, K.W. "The Thermal Analysis of Brake Disc with 3-D Coupled Analysis," Journal of Key Engineering Materials,  2005.

10. Kim, B.S. and Lee, C.T, and Kang, B.S. and Moon, B.Y. "Statistical random response analysis and reliability design of structure system with non-linearity,"  Journal of Mechanical Systems and Signal Processing,  2004.

11. J. of KSME, Vol.27, 12, pp.2019-2027, 2003 

12. J. of Korean Ceramic Society, Vol.40, 3, pp.286-292, 2003 

13. J. of KSNT, Vol.22, 5, pp.539-544, 2002 

14. 김병수, 김위대, Hertzian 접촉하중시 TiN/Steel의 표면균열에 대한 모드 I 과 모드 II 응력확대계수, submitted to KSME, 2001 

15. 김병수, 김위대, 부명환, 유한요소를 이용한 TiN/Steel 코팅재 표면균열의 파괴거동에 대한 해석, Proceedings of the KSME 2000 Spring Annual Meeting, pp. 1-8, 2000. 6 

16. Mann, K.A., and Kim B.S., Influence of Stem Shape on Fatigue Fracture of the Cement Mantle in Femoral Hip Component, Transactions of Orthopaedic Research Society, Vol.25, pp.502, 2000. 3. 

17. Kim, B.S. and Mann, K.A., A Thin Cement Mantle Decreases Fatigue Life of Cemented Femoral Hip Component, Transactions of Orthopaedic Research Society, Vol.24, pp.880, 1999. 2. 

18. Eberhardt A.W. and Kim B.S., Effective Stress Intensities and Possible Mechanisms for a Surface Crack in Polyethylene Under Rolling and Sliding Contact,Transactions of Orthopaedic Research Society, Vol.24, pp.969, 1999. 2. 

19. Eberhardt, A.W. and Kim, B.S., The Effect of Crack Length on Stress Intensities of Vertical Surface Cracks in Polyethylene Subject to Rolling and Sliding Contact, Transactions of the Orthopaedic Research Society, Vol.23, pp.810, 1998. 3. 

20. Byeong S. Kim, Finite Element Analysis of Surface Cracks with Applications to Tribological Coatings and Polyethylene Wear, 박사학위논문, University of Alabama, Tuscaloosa, 1998. 5. 

21. A.W.Eberhardt and B.S.KIM, "Stress Intensity Factors for a Vertical Surface Crack in Polyethylene Subject to Rolling and Sliding Contact," journal of Biomechanical Engineering ASEM Transactions, Vol.120,pp.778-783,1998.12. 

22. B.S.KIM and A.W. Eberhardt,"First and Second Order Extrapolation for Model I and ModelII Edge Cracks,"Engineering Fracture Mechanicas,Vol.57,No.6,pp.715-720,1997.10 

23. Alan W.Eberhardt Byeong S.Kim "Crack Face Friction Effects on Mode II Stress Intensities for a Surface Cracked Coating in Two-Dimensional Rolling Contact," Tribology Transactions Vol.41,1,pp.35-42,1998.1. 

24. Alan W. Eberhardt, Byeong S. Kim, Hallie E. Placko, J.R. Tamarapalli, Jack L. Lemons, Fracture Mechanics of Polyethylene Pitting Wear in TKR: Pilot Finite Element Models, Proceedings of ASME Bioengineering Conference, BED Vol.35, pp.109-110, 1997. 6. 

25. Alan W.Eberhardt Byeong S.Kim, E.Douglas Rigney, Gerald L. Kutner,and Charles R.Harte,"Effects of Procoating Surface Treatments on Fatigue of Ti-6AI-4V,"  Journal of Applied Biomaterials,6,pp.171-174,1995.10.